Building a Heat Press – Procedure and Instructions

Building a Heat Press – Procedure and Instructions

PROCEDURE FOR BUILDING A HEAT PRESS MACHINE

1. Assemble all the required items and tools (jacks, metal, aluminum sheet, nuts and bolts, heating element [coil].

2. Fit the coil on the frame and place an Aluminum sheet right above it. Put a strip of metal in the middle to reinforce it as shown.

Fitting the coil on the frame

3. Confirm all heating elements (2 long coils 2500 watts each + control switch) are in good condition.

Testing Condition of Heating Elements

4. Build the metal frame of dimensions (L*W*H 90cm by 33cm by 100cm dimensions) and place the two aluminum sheets accordingly.

Please visit the next post to learn how to use this heat press to make plastic trays out of plastics